DESCRIPTION: A cost effective, concentrated alcohol replacer for use on high speed web and sheetfed
presses. It contains highly active wetting agents for reducing the surface tension of the
press ready solution. AQUANOL 600 is compatible with all types of fountain solutions,
fountain additives, plates and substrates. Depending upon conditions, AQUANOL 600
can reduce or eliminate the use of alcohol while maintaining high quality standards.
SPECIFICATIONS: Flash Point (TCC): >210°F (PMCC)
Appearance/Odor: Clear liquid/mild ether odor
VOC Content (EPA Method 24): 6.0 lbs./gal.
INSTRUCTIONS: Mix 1 to 4 ounces/gallon of AQUANOL 600 into the press ready mix. Normal starting
dosage is 2 ounces per gallon. To decrease water setting or reduce lead edge toning,
increase dosage by 1 ounce per gallon. If ink emulsification or roller stripping occurs
decrease dosage by 1 ounce per gallon. For excellent results, use with an RBP AQUA
SERIES fountain concentrate. Contact an RBP technical representative for
recommendations.
BENEFITS:
• Lowers the surface tension of water allowing the fountain solution to spread out
quickly and uniformly on all surfaces
• Designed to reduce or eliminate feedback problems
• Contains humectants to prevent roller ends from drying out
• 100% concentrated formula provides maximum effectiveness with minimum
usage levels
• Safe, high flashpoint - no need to use red safety container
• Will not harden rollers as IPA does
• Achieves same density with less ink
